4072-R2_ML&P_TownOfBuxton

Section 4.F.2.d. d.

Trim: Where trim is used, it shall be a color that complements the building’s primary color. Neon tubing shall not be allowed as an exterior trim or accent material. All door and window trim must reflect the style of trim of the entire building and complement the front façade design. Metal Trim (Pre-Bent or Coil Stock) is only permitted for rake and horizontal roof trim. Metal Trim shall be painted and a minimum of .024” thick. Section H.2.a a. PitchedRoofs: Buildings shouldbe designedwithpitched roofs. Where pitched roofs are used, the minimal pitch shall be at least 5/12 . Projecting rooflines shall be designed to create strong shade/shadow patterns. Where pitched roofs are used, the design shall create no horizontal line greater than 100 feet, without an architectural break using features found on traditional NewEngland buildings. Section 6.D.I Maximum Sign Sizes 1. Sign Dimensional Chart The following chart summarizes the maximum gross area (in square footage) that is permitted for signage by type of sign design. MAXIMUM SIGN SIZES – Freestanding (FS) / Wall-Mounted (W) TYPE OF SIGN DESIGN REF MAX. DIM. (FS) (W) TEMPORARY SIGNS: Advertising retail Gross Area 32 sf Advertising retail in the Village Zone Gross Area 8 sf … ADVERTISING/RETAIL SIGNS: Advertising Freestanding Signs Gross Area FS 100 sf Length FS 16’ Heights FS 16’ Advertising Freestanding Signs in the Village Zone Gross Area FS 24 sf Length FS 8’ Heights FS 8’ Advertising Wall Signs in the Village Zone Gross Area/bldg. 3 sf Advertising Wall Signs Gross Area/bldg. 100 sf Face: wall (see note 5) Combined Gross 150 sf Area Corner Lot (see note 4)

87